If you are shopping on a budget, remember that all diamonds sparkle, and the most important attribute of an engagement diamond is the way it makes a woman feel. Diamonds are the ultimate gift of love. Any diamond you choose will make your woman feel cherished.
However, it is important that you do a little homework before you go shopping. The 4C's (Cut, Clarity, Color and Carat Weight) are the basic attributes used to compare diamonds. An understanding of the 4C's will give you a way to compare two diamonds and help you set basic price parameters.
The finest diamonds are colorless, rare and expensive. On the GIA grading scale below, D, E, F are considered colorless, G, H, I, J, K, and even L, near colorless and any grade M or below shows an increasingly yellowish tinge. Beyond the preference for a whiter stone, however, the color of a diamond does not affect its brightness or sparkle.
Diamonds with fewer flaws are rare and therefore more highly prized. In many cases, these flaws (or inclusions) don't detract from the beauty of the diamond because they are invisible to the naked eye. The GIA grading scale below shows clarity ranges from "Internally Flawless" (IF) to "Very Very Slight" Inclusions (VVS), to "Very Slight" Inclusions (VS), to "Slightly Included" (SI), to "Included" (I).
More than any other attribute, it is the Cut that makes a diamond brilliant and beautiful. A diamond that is well cut reflects light internally and displays a dazzling shower of light back through the top of the stone. A poorly cut diamond will leak light out of the bottom and sides, as illustrated below. Symmetry is another important factor in the brilliance and beauty of a diamond. A diamond is like a small house of mirrors. If the facets are lined up properly, the diamond returns more light to the viewer's eye. Finally, a diamond that is well Polished will reflect more light and sparkle from the surface to the viewer's eye. Cut, Symmetry and Polish are rated on your diamond certificate from Poor to Excellent.
All the information about a diamond such as carat weight, clarity, and color are very important but, when all is said and done, what will really matter is how good it looks on a woman's hand. Following is a series of example images showing diamonds of various carat weighs and how they look in relation to an average woman's hand.
Click on the buttons below to view the relative size of different diamonds in a solitaire engagement ring.
All diamond rings look bright and sparkling when worn on a woman's hand. Women love to wear diamonds. So don't be too concerned if your budget allows only a lower quality diamond. Let's face it: for the same price, some women would prefer a larger diamond of lower quality over a smaller diamond of higher quality.
However, the quality becomes clear when different diamonds are viewed under a microscope.
While choosing a diamond is a matter of opinion, we have our preferences. For the price, larger is better as long as the diamond does not fall below your expectations for brilliance and beauty, which are determined by the Cut, Symmetry, Polish, Clarity and Color ratings.
The images below show a range of diamond qualities viewed under a microscope.
This is an F color VS1 clarity diamond with an "Excellent" Cut and Symmetry. It has no flaws visible to the naked eye. It will display a shower of fire, scintillation and brightness when moved under a source of light. Nearly all of the light entering the diamond is reflected back to the viewer's eye through the table and crown of this diamond.
This is a G color I1 clarity diamond with a "Very Good" Cut and "Excellent" Symmetry. It has a flaw (near the top) that would be visible to the naked eye. However, a diamond like this can be a very good value for the price and the G Color is virtually indistinguishable from the highest color (D) after the diamond is mounted.
This is a G color I2 clarity diamond with a "Good" Cut. It has several flaws and it looks a little dark overall, but there is plenty of light reflecting through the table, and it will show flashes of fire and scintillation when it is moved under a light source.
This is a J color I3 clarity diamond with a "Fair" Cut. It looks opaque because there is very little light reflecting through the table. This is a result of both a shallow Cut and several cloudy flaws inside the stone. Stones like this can look fairly dull.
3 - Diamond Certificates
The features of all diamond laboratory grading reports include specifications on a diamond’s cut, shape, carat weight, color, and clarity. The report also grades for symmetry and polish, dimensions, presence of fluorescence, a report number, and some contain a "map" depicting the type and location of the stone’s major inclusions.
While the measurements and mathematical cut and clarity are fairly cut and dry, there is quite a bit more of subjective judgment and opinion used when it comes to color and clarity. Both are judged by the human eye and standards that do vary from lab to lab, as well as person to person.
Just as every diamond is unique, the "map" of two SI2 diamonds, for example, will look quite different from each other. One might show a large feather on the right side of the diamonds, while another may have several small crystals located under the table.
Which should you choose? Just looking at the "map", it is very difficult to tell what kind of impact these inclusions will have on the diamond. Only a diamond expert, with years of experience and training, will be able to interpret the grading report and judge the stone itself to find the right diamond. Even then, an expert needs to actually look at the diamond.
Two diamonds with the same color and clarity grades will have very different prices. This is true with the same laboratory, and especially so for different laboratories. That is because diamonds of the same grade will look very different to the eye, and that is what determines the price.
What are the differences in the laboratories?Diamonds with the same grading from different laboratories will have wildly different prices. This is the norm in our industry.
Are some laboratories good and some bad?
Let’s make a comparison between the Diamond Laboratories with something more we deal with daily. Think of the laboratories themselves as salesmen.
The GIA & AGS laboratories are the "Gold Standard" with 50 years of experience in the field. They "coined" the diamond grading letters D-Z. There is a very long waiting list, currently 6-8 weeks, to get a certificate, with a 100% charge for "rush service" and a premium price for a certificate, as well as shipping the diamond back and forth. It is a substantial amount of money.
The CGL laboratories, on the other hand, is our local labs. They will see you right away, treat you competently, grade the diamonds accurately and at a fair price.Non USA EGL certificates will grade according to different standards. Nothing wrong with the diamonds, it is just that the descriptions are different. Way different, by as much as 4 grades in color and clarity. You get a diamond graded "H" and it may well be an " or M". Hence their "lower prices" when comparing to other diamonds with GIA, CGL, or AGS certifications. All of overseas EGL labs are like salesmen. Salesmen lie, exaggerate, etc. The EGL diamonds are less costly in comparison, when comparing color and clarity grades from other labs, but they are not the color and clarity as graded by the GIA or CGL on the certificate. The diamonds are PRICED according to the market,(clarity and color)so they seem like bargains, just do not be influenced exclusively by certifications. Don't make "apples to apples" comparisons. Are they a "good buy"? Yes, they are. The majority of diamond sold have these certificates. What makes a diamond a "good buy" is not the certificate, or what the diamond is graded at, or what certification it has. It is the price for the actual level of quality you are receiving. That is what is so subjective.
Diamond certificates have their value. They are great when you are insuring your diamond. However, at the end of the day, a diamond certificate should not be used as the final determinant when making your purchase decision. Setting aside all the laboratory certificate mumbo-jumbo, there are two very important aspects that have to be taken into account when choosing a diamond.
Do you need help to choose? Give us a call @ 888 527 9422 and talk to one of our experts at Dacarli.We will go so far as to email a picture of the diamond you chose, as well as 2 other choices.
Can I Trade-up In The Future?
Buy the diamond ring you can afford today, and
trade it in for a larger diamond tomorrow.
|Da'Carli Diamond Jewels guarantees the full trade in value of your diamond purchase toward a larger diamond worth 200% or more than the original price, at any time you wish.
You will receive credit for the price paid for your diamond towards a new diamond purchase. There is no limit on the number of times you can upgrade, and there is no re-stocking fee. Simply call our toll free number, 1 888 527 9422, and speak with one of our friendly representatives, and obtain your Return Authorization Number (RA#).
The original purchase price of your trade-up will be applied toward the purchase of a new diamond with at least triple the original value, providing the following conditions are met:
A. Diamond is not damaged.
Shipping: Please send your diamond with original diamond certificate, copy of original purchase receipt and Return Authorization Number to:
HIR Industries Dacarli
Note: Please, send your item fully insured. You should not write anything outside of your package that might hint to anyone that it contains jewelry